November 6, 2013

Team Colors Mesh Wreath


If you have a favorite team, it just makes your heart skip a 
beat when you see it's colors together, doesn't it?

Make this easy and inexpensive deco mesh wreath 
for your door to show your team pride.  A friend of mine
is a fan of Alabama State University and she wanted a
door wreath in ASU's school colors of gold and black. 

Use your imagination and envision your team's colors
in this fun, fluffy, weather resistant deco mesh wreath. 

To make this wreath you will need:
3 rolls of deco mesh
a wreath form (this one is 16")
pipe cleaners (best in mesh colors)
a team logo if desired

The deco mesh is getting much easier to find and more and
more colors are becoming available in craft stores.
If you cannot find the mesh locally, an internet resource
 is Mardi Gras Outlet.  They also have good tutorial blog.

The gold and small black mesh came from Hobby Lobby.
It is regularly on sale for 40-50% off or you can use a
coupon.  Even not on sale, it is a good price but save a
few bucks when you can. The gold has metallic in it
so it is a few dollars more than the non-metallic mesh rolls.

Michael's has also started stocking some mesh too.
The medium width mesh came from there.
It is about $8 per roll (but you could use a coupon).

You don't have to vary the width of the meshes...
I already had the black rolls and wanted to use them.
At least one of the rolls should probably be the
21" wide to form a good base color. 

For regular deco mesh wreaths, I like to paint the wreath
form the same color as the main color of mesh.  For this
fluffier type mesh wreath (I call it a "ruffle wreath"...
does anyone know another name for it?) it is so thick that
the wreath form does not show through the mesh
(but you can paint it with acrylic paints if desired). 

Cut the pipe cleaners into thirds...for this wreath you
do not need to leave them long.  Some folks use zip ties
to attach the mesh to the form for this type wreath.  
I'm just used to pipe cleaners so that is easier for me.

Fold the cut pipe cleaners into "V" shapes. 

Unroll one of the mesh rolls for several feet.
About 8-10" from the beginning of the roll will
be your first gathering point. You are leaving a "tail".

To make the mesh "pouf", you are going to gather across
the width of the mesh with your fingers.  You can turn
under the edge of the mesh if you want to.

Pinch, pleat or accordian fold the mesh all the way 
across keeping it tightly in your fingers.



(Sorry, I didn't take these photos in sequence...
showing the black mesh being pinched but gold
was the first color on the wreath form...
had to wait for my "photographer" for those photos.)

When you have your mesh gathered, place it on the top side 
of one of the wires of the form. Push a "v' shaped pipe
 cleaner from the back of the wreath underneath the gather.

Twist the pipe cleaner tightly on top of the gather
to hold it in place on the wire of the wreath form. 

(This is the fourth "ruffle wreath" that I have made
but I just looked at one in a store to see how it was 
done...I don't know the official instructions.
It doesn't seem to matter which wire of the wreath
 form you start your attaching with.  This wreath started
with the gold mesh on the third wire from the center. )

From your first gather/attachment, measure down 10"
and make another pinch/pleat/fold.

Attach your new gather about 2-3" away from the first
gather on the wreath form.  Work you way around the form.
I stayed on one wire for each color, not zig-zagging
 between wires like you might for other mesh wreaths.

It helped me to keep measuring the length of the "poufs"
so that they would be the same height in the end. 

It worked out that there are 3 to 4 poufs attached in 
each section of the wreath form.  At first I thought that
there was enough mesh on the gold roll to make 4 poufs
per section but then I realized I was running out of
 mesh so I went to 3 poufs per section. 

Here is a photo of the back of the wreath with
the gold roll of mesh attached:

See the "x"s at the top of the wreath?
That's the 4 poufs per section part.
At the bottom is the 3 poufs per section part...
like "oh no!" I'm gonna have to go buy more 
gold mesh if I keep making them so close.
I can't really tell the difference in the finished product.

The poufs are so close together that they kind of hold 
each other in place but you can twist the ends of the
pipe cleaners around the wires if you want to to keep
 the poufs where you want them. Or glue the pipe
 cleaners from the back when the wreath is finished. 

The "tails" keep the mesh from pulling out of
the first/last pipe cleaner's grasp.  Always leave
some "tail" on the mesh ends and just push/weave
them into the poufs from the backside or attach
them onto the wreath wires with another pipe cleaner.

Next the medium width black mesh was attached to
the outermost wire in the same way as the gold was
attached.  The poufs were still 10" long but a little
more spaced out to be able to get around the longer
wire with only one roll of mesh. 

Here is the wreath from the back immediately after
 the black mesh was attached:




This is how it looks when you pull the black poufs 
forward and in between the gold poufs:

The narrow mesh was attached in the same way
(but with 8" length) on the innermost wire of the form.

Here it is from the back:

I ran out of the "good" color of pipe cleaners and had to
 go with green and purple.  Better buy about 50 pipe
 cleaners for the wreath if you don't want a mix of colors.

Also pull the inner ring of mesh poufs in 
between the middle layer to intermingle the poufs.

I tried to find an ASU logo item that would fit the wreath
with no luck.  The wreath got a homemade logo.

On the internet I found a logo and made an image 
on my home computer.  The back of the logo was 
scribbled on with a pencil and then traced onto a 
piece of foam core from the Dollar Tree.

A cheap boxcutter had to stand in for the lost Exacto
knife to cut the logo out.   The rough edges were filed 
down with an emery board. 

The logo was painted gold and then had glitter sprinkled
on it while the paint was still wet for a little "bling". 

When it was dry, a small hole was punched at the top
and the logo was attached to one of the wreath's wires
 with fishing line (to try to be as invisible as possible). 

There are copyright infringement laws for team logos if
you use the logo for profit so don't make these for sale
with a homemade logo on it. If you buy a logo with the 
official tag on it, the copyright fee has already been paid
so keep the tag and attach it to the wreath if it is for sale. 

You can glue small items on top of the mesh poufs
of the wreath also.

My friend was very happy with her ASU black
and gold wreath for her front door.




The total cost of this wreath was $20 (getting 
the mesh on sale $15...wreath form $4...
pipe cleaners $1).  
Now go make one in YOUR team's colors!

Here are some other deco mesh ruffle wreaths
to show you other color variations:


From the post 

I'm sharing this post at
Inspire Me Tuesday @ A Stroll Thru Life
Open House Party @ No Minimalist Here
Tutorials, Tips & Tidbits @ StoneGable

October 31, 2013

Vintage Inspired Halloween Folk Art



Although I can't afford the real thing, I am drawn to the charm
of vintage Halloween folk art pieces.  Over the past couple of 
years I have collected a few reproduction vintage
Halloween items and even attempted a DIY vintage pumpkin.
This year the little collection found itself in the kitchen.

Most of the items came from Hobby Lobby when their 
Halloween items were on sale.  The two largest pumpkins
were purchased from a floral wholesaler's tent sale. 
The suprized pumpkin was made for about $3 mostly
 from items from the Dollar Tree.  

The $3 pumpkin got her start almost accidentally.
The large paper mache' pumpkin with the striped
 hat was a good buy at $11.25...


...but he had condition issues like broken surface areas,
 weird painting around the bottom and the top of his
head doesn't fit onto the bottom very well. 

I "googled" around to try to find a way to fix the 
broken areas and came across "paper clay".
Most of  the "recipes"  called for toilet paper, water,
glue, joint compound and linseed oil.  They made much
more quantity than I needed for a patch job. I decided to
just use the first three ingredients (which I already had)
to try to fix the broken areas.  

(I could have tried traditional paper strips mache' but it looked like that would have 
taken more time to make it blend into the original pumpkin surface.)

At first I mixed the toilet paper (about 10 sheets at a time)
with enough water to throughly wet the paper and
then added a few squirts of school glue in a bowl and
mushed them all together.  

I just pinched off pieces of the mush and patted the
"spit balls" into/onto the broken areas.  After drying 
overnight, the patched areas were very firm and
the texture was similar to the surrounding areas. 
It also took acrylic paint well. 

That experiment made me wonder if the same mix
would work on hiding the obvious seam that is on
Dollar Tree carvable pumpkins.

Well, yes, it did hide it but then the "fix" was a different
texture than the original surface.  However, the toilet 
paper mache' gave the middle of the pumpkin a 
similar texture to the reproduction vintage Halloween 
items from Hobby Lobby. I figured the HL designers
 had researched and made their items close to real
vintage items so I would just copy HL.

As I went along, I decided it was easier to just soak a
few pieces of toilet paper in some water, pinch off
pieces of the wet paper, press it onto the pumpkin 
 put a little glue on top of the "spit ball" and rub it in.



It is very easy to do BUT I found that with either method
the glue makes your fingers so sticky that you have to 
apply a "spit ball" then move over to another 
area and do the same so you are not accidentally 
pulling up non-dried areas with your sticky fingers.  

So the little pumpkin actually took about 3 sessions of
applying, then letting the toilet paper, water, glue mix
 dry and starting again. Each session was quick.
  It is easy to stop and start...just rinse out
 the bowl and wash your fingers off between 
sessions.   Eventually all the little sections of the
dried mix bump up against each other.

I tried to put larger pieces of the soaked toilet paper on
the pumpkin (on the bottom so it wouldn't show)
 to make the process faster but the texture was 
different and not like the real vintage pieces.

When the surface has been covered with the toilet paper
mache' and has dried, it is ready to paint.

OK, so I said that you could make the vintage pumpkin
for about $3 with items from Dollar Tree:
pumpkin $1
school glue $1
water color set $1

Actually I did not use a water color set to paint the pumpkin
but an inexpensive acrylic paint from the craft store.
Also I used a sharpie pen and not black paint from a 
water color set but you COULD use the set and get the
same results...truth in crafting costs. 
Oh, I didn't count the cost of the toilet paper...I HOPE
that you have some of that on hand already.

This is the pumpkin after the first coat of paint:

For the second coat I used a slightly different orange to
give it a little variation but you would not have to do that.
If you are using a water color set, you could mix a little
more red or yellow into the orange to make it different.

For the face of the pumpkin, I "googled" and found
a vintage item that looked easy to copy.  You might
find a vintage pumpkin face that you like better.

I was afraid that the paint might "run" or "bleed" on the
toilet paper surface so I experimented on the bottom.
The paint did not run or bleed.  Maybe the glue seals it.

Here is our girl all finished...

...Tom Kat thinks that she looks like Betty Boop.
To give her a little more aged look, she had a little 
 brown acrylic paint mixed with satin varnish
 brushed on top of the dry paint.

(This same toilet paper mache' technique could be used
on larger faux pumpkins too to make larger  vintage-inspired 
Halloween decorations.  I'm planning on getting a larger faux
pumpkin when they go on sale after Halloween and try a
big one next year. )

Here she is with her new friends:

The large white pumpkin got an orange ruffle to help
him blend in color-wise a little better with the other items.

 In looking at vintage Halloween items online, I 
noticed that a lot of them have ruffles at the neck.
All of the orange crepe paper was sold out so the
pumpkin got a ruffle made from 3" strips of paper napkins.

It was easier to tape the ruffle to the cake stand 
than to try to attach it to him. 

I had forgotten that I had bought the medium sized 
vintage-looking cat and pumpkin heads last year at a big
discount at the after Halloween sale  at Hobby Lobby. 

When HL put their Halloween items on sale back in
 September of this year, I guess I still liked them and bought
 them again (forgetting about the ones sitting in the attic).
As I was getting Halloween items out of starage,
 I found the ones purchased last year too.

This year's are exactly like last year's but even cheaper.

If you look closely you can see the repaired and repainted
areas on the large orange pumpkin.

For right now, good enough is good enough.
His head still does not fit together very well.

These guys are just like they are when they came from HL.
The black riser the cat head is sitting on is just some wooden
plaques from the craft store painted black and stacked.

Since I had duplicates of the SAME items I decided
to split the vintage items up between the kitchen table
 and the counter...maybe no one will notice the twins.



The frills on their hats could use a little sprucing up but
if these items really were vintage, the hats would probably
look like that anyway.

The black candlesticks are ones that were purchased in 
the clearance section of Hobby Lobby and all painted
 black to unify them.  They were used in a similar vignette
a couple of years ago in "Pick A Peck of Pumpkins".

All of those faux pumpkins on the candlesticks got a new 
paint job this year after being bleached by the sun in the
yard for a few Halloweens.  They also got new stems.
If you want to see how I made the stems you can click 

Another vintage vignette by the refrigerator is tiny.

It got started when I got a set of little reproduction vintage
 cards with tiny clothespins on the back from World Market.  
I haven't really figured out a good use for them but
for now they are clipped onto votive candle holders.


On this card, the little girl is warming her buns by the fire...
...I hope her buns don't CATCH fire on the candle.
I don't have them lit unless I am in the room.

This little guy came from Dollar Tree.

To me he looks like some of the vintage items that have
the body of a human but the head of a pumpkin.
I enhanced his colors a little bit with acrylic paint.

Thanks for taking a Halloween tour of my kitchen décor!

© Miss Kopy Kat. Design by FCD.