April 28, 2020

Make A Balloon Garland For About $10


Balloons as party decorations has never been more popular
due to all the creative ways that folks have found to use them.

One of my favorite ways to use balloons that I have seen is 
as garlands. I had hoped to make balloon garlands to celebrate
my daughter's birthday on a family vacation to the beach.
I wanted to experiment making a balloon garland to see if I
 actually could. The internet has good tutorials on the garlands. 

Actually, I was amazed that the garlands were so inexpensive
to make with easily obtainable items. There are lots of different
creative ways to put them together. I wouldn't be writing this
blog post if I had not found another way to create the garlands
that is cheap and works better for me than the other methods.

I was in Dollar Tree getting balloons for my trial garland and
saw rug grip pads there. It struck me that the holes in the rug
grip pads might be able to hold the balloons for a garland. 

I got a couple of packs to try to use them to hold the balloons 
for a garland. They were cut into strips about 1.25"...keeping
 at least three holes across on each strip. 

The pads are 18" x 28". I got about 12 strips 28" long.
If you joined all the strips together, that is about 24 feet of
balloon garland base from one pad. 

To join the strips together overlap strips about 4 holes on each
end. Then use ribbon, fishing line, floral wire or other items to
 join the ends together by weaving through the holes and tying off. 



If you don't want to make your own base for a balloon garland
there are balloon strips available for purchase. Amazon, Party 
City and Hobby Lobby have them (probably lots more but those
are the places I saw them available). Here is the one from HL...


I did try this one from Hobby Lobby. It was pretty good but the
balloons tended to pop off of the strip more easily than the one
I made from the Dollar Tree rug grip. 

Here are other things that you will incur costs on in making a
balloon garland...mostly balloons.

For the balloon garland pictured so far in this post, here are the
balloons that I purchased. The white and pink balloons are from
Dollar Tree so $2 for 30 balloons. The lime green and purple 
balloons are from Hobby Lobby...25 balloons per pack for $1.59.
The confetti balloons (also HL) are 8 for $1.59. 

These things are optional but purchased from Dollar Tree so $1
each...balloon pump, two 3M hooks, double stick tape. I didn't
count these in the $10 cost. In reading other posts about balloon
garlands, some had suggested double stick tape to add small 
balloons to hide blank spaces. It did not work well for me. 

For my $10 tabulation I figured $6.50 on balloons, $1 on rug
grip pad (24 feet of base for garland), $1 for ribbon
(Dollar Tree) to tie the lengths of cut rug grip together. 

The non-fun part of balloon garlands...blowing up balloons.

Leave at least a foot of (whatever you are using as a) base of 
the garland free of balloons to be able to attach it to the 
surface where you are hanging the garland. 
Pull the neck of the balloon through the base you are using. 

For the rug grip base I used the middle hole to attach the 
balloons so it would be less likely to break than the edge holes. 
I actually never had a break. 

I learned this as I went along... after pulling the knot through
 one hole, pull the "nozzle" (very end balloon...rolled circle)
 through an adjacent hole also. That extra step in not mandatory
but I never had a balloon pop off after doing that.

Vary the colors of the balloons if you are using different colors 
of balloons as you attach them down the base. 
 Here is the first few feet of the garland as I started my trial...

The more footage I worked along attaching balloons, the
better it looked. You can also vary the sizes of the balloons
without purchasing different sizes by not blowing all the 
balloons to their maximum size. 

Whatever base you are using, don't use all the holes. 
Skip three to six holes between balloon attachment. 

There are probably other ways to hang your balloon garland when
you get it the length you want it but I used Command hooks.

Use the end of the garland base without balloons to attach to
the hook. With the balloon garland there is a lot of pressure
 from all of those balloons being so tight together. I did not 
have a helper but I would suggest you trying to get one for
 the hanging part.

You may need to use tape or other devices to keep the garland
ON the hooks, nails or what ever you decide to attach it to
the wall with.  My first hook ended up being a hot mess.

For attaching the other side of the garland I opted to use another type of command hook upside down. This one (used upside down) was able to hold the garland without using tape to keep it secure.
 I just pushed the hook through one of the holes in the rug grip base. 

For this garland I used a hook on each end of the mirrored
 screen to attach it. I made it extra long on purpose 
so part of the garland could drape down.  



Even if you have tried to vary the colors of the balloons as you
 are attaching them to the base, after you get it up you may have
 too many of one color showing to the front. After you have the 
garland attached, you can gently pull some of the balloons
 to the forefront of the garland to get the look you want. 

 Also if you have spaces where the base/spine/strip shows
 through, you can use an extra balloon not blown up all the
 way to camouflage it.

If the little balloon does not stay in place by itself you can try
double stick tape or glue dots to more securely attach it. 
I actually had the best luck by using the tape or glue dots for
temporarily holding it and adding clear glue at the contact 
points for long-lasting attachment. 




Well...I did love my experimental balloon garland but 
I gave it to a neighbor girl to enjoy it, which she did. 

After my balloon garland success I got more balloons
but in ocean colors for the anticipated beach birthday party
 (which never happened due to the virus outbreak). 
 To try use the balloons, I started making balloon
 garlands as backgrounds for Zoom virtual birthday 
parties with my grandchildren. 

I ran out of time for the first Zoom birthday party. 
I only got the ends done...I call these balloons bundles.

That might be an option for someone that does not need an
entire balloon garland. Balloon bundles use the same 
construction concept but just shorter base and less balloons. 



For the next Zoom birthday party I did get the entire balloon garland done. I added in some pink balloons to tie in with the pink/red poster. It was only a vertical garland but it was festive.



I'm telling you...these balloon garlands have a lot of life...they 
are not easy to contain/lay flat. Just plan on some dimension. 

Here are the balloons for the grandchildren/Zoom/vertical
garland. Some colors are leftovers from the other garland.
No confetti balloons for this one. 

Here are the Command hooks used again. I used tape to secure
the garland to the hooks. Here you can see how flexible and
 strong the garland base is that is made from the cut up rug grip . 

To hide the hook and the base/spine of the garland I added two
partially inflated balloons. They stayed in place initially by 
adding glue dots to attach them to adjacent balloons (not 
trying to attach them to the base) but they were on the 
floor by the morning. 

 By pushing them in again and adding clear liquid glue at
 the contact points they stayed in place for over 10 days. 

Same on the other side of the garland/hook set up. 


If you have a blank space once you get the garland up, you
can gently pull/push the balloons to try to hide the base. 


Wonder how long your garland will last?
I needed to take the garland on the mantle down to put up
a more serious backdrop. Here is the garland after 10 days.

The balloons are still perky but maybe have lost a little
color. Tip...if you are making a balloon garland for a party, 
you can make it a couple of days ahead of time and it will
still look good for the event. 

I worked on the balloon garlands in spurts so I don't know
exactly how long it took me to make them. The first and 
longest garland was probably four or five hours.
 The shorter one was about two hours. If you have a helper
the garlands will go much quicker. 

This might be a fun project to try with the kids if you are
looking for an inexpensive activity at home even!

Here is an image you can put on Pinterest if you
want to save this for future reference. 

I am sharing this post over at these blog parties...
Inspire Me Tuesday @ A Stroll Thru Life
Make It Pretty Monday @ The Dedicated House
Metamorphosis Monday @ Between Naps On The Porch
Vintage Charm Party @ Our Hopeful Home
Grace at Home @ Imparting Grace

7 comments

  1. Love this idea. Thank you for a genius shortcut. I pinned to my Party folder. Can't wait to have a reason to utilize it. Cindy

    ReplyDelete
  2. Hi Gayle! I wish I had your wonderful instructions for making a balloon garland a few years ago for my niece's sweet sixteen birthday party! I don't remember what I attached the balloons to, but your idea is awesome! I was following a Youtube video and I tried creating some sort of color pattern in the garland which was a complete fail. I had to put the balloons in trash bags to transport them to a hotel where the party was being held. It was fun but challenging at the same time! I'll do better next time with your tips! Great to see you back blogging!

    ReplyDelete
  3. This looks amazing! What a gorgeous balloon garland! I saw your feature at Make It Pretty... Congrats! We'd love to have you link-up at Tuesday Turn About via myweeabode.com. Hope to see you there!

    ReplyDelete
  4. That is a cute idea and I have been seeing these around. You get a lot of pop (no pun intended) for the buck with this idea. What a GREAT statement it makes. Yours is just lovely and I adore the colors!!!! xo Diana

    ReplyDelete
  5. The above article is nice and interesting, thank you willing to share! Greetings success of admin Cetak Buku Murah wish you deign to visit my website, thank you :)

    ReplyDelete
  6. I’m going to read this. I’ll be sure to come back. thanks for sharing. and also This article gives the light in which we can observe the reality. this is very nice one and gives indepth information. thanks for this nice article... palloncini

    ReplyDelete

Thank you SO MUCH for taking the time to comment on my blog!

Latest Instagrams

© Miss Kopy Kat. Design by FCD.